Our 10 Best Dodge Ram Anti Flicker Harness Of 2023 – Reviews & Comparison

Features :

• ★ High Quality: Made of the best material LED headlight bulb decoder is a capacitive decoder transmitted by pulse signal, much better than resistive decoder, environmental protection and energy saving.
• ★ Efficient Features: Solve LED headlight failures, bulb scrap, super flicker, eliminate error codes and much more Make sure the metal resistor does not come in contact with the plastic wire to prevent the plastic from melting. Nice warning eliminator that solves power problems in most vehicles from upgrading to LED headlight bulbs.
• ★ Beautiful Design: LED digital smart smart decoder for safety protection and heat dissipation, digital circuit board with resistors, capacitors, smart ICs and other components. Braided cables help avoid current interference. Beautifully designed, precision crafted, durable and long-lasting.
• ★ Widely Used: 2 LED headlight decoders, compatible with most cars. All-in-one design, self-installation, plug-and-play.
• ★ After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.

Features :

• Heavy Duty Relay Harness.
• 50W 8 ohm Dual Resistor Canbus Anti-Flicker for High and Low Beam
• Solve Error code, flickering, random shut off; might not work with all the cars!
• Works with both HID & LED Bulbs
• Warning – Load Resistor will get extremely hot, please mount them onto metal area or hot resistant area to prevent damage to the vehicle. DO NOT mount on plastic.

Features :

• [H11 LED Canbus Decoders]–This H11 LED canbus can fix issues,eliminate 99% error messages on dash of the cars, and solve the flickering and not working issues.
• [99% Compatibility]–The canbus decoders H11 for Dodge Ram 1500 2500 3500 4500 are more powerful than other normal bulb resistors decoders. Even for sensitive vehicle models,this LED resistors adapter can solve most kinds of issues of the vehicles that cannot work properly due to the intelligent detection system.
• [Plug N Play Anti Flicker Capacitor]–Please directly connect the anti flickering resistor decoder to the H11 LED bulbs and the original power socket. No modification required and easier to install. After installation, please check and make sure that the decoding body does not touch plastic and any other objects that are not heat resistant.
• [Reasons of Canbus Issues]–When you replace or upgrade the LED headlight bulbs, the power of the new bulbs and the original bulbs is inconsistent, then the detection system of the car onboard computer will find it and tell you through some ways, such as: not working, flickering, dashboard error messages or warnings, etc.
• [Notice]–The H11 warning canceller LED resistor can solve the canbus issues of most vehicles on the market. However, the reasons of the decoding issues are complicated and the vehicle models are various, so we could not guarantee that this decoder solve all the decoding issues of all vehicle models. If you need help , please do not hesitate to contact us.

Features :

• 【Capacitor Decoders】if your car facing led headlight on and off problem you might need LED decoder to resolve this problem.Note: Doesn’t work with DRL Problem. Don’t use on HID light, This decoder only work on LED headlight, If you have any question about fitment and car model please contact us direct from Amazon message to double check
• 【Special Car Design】This led decoder are tested and compatible for car models such as 2012 Dodge Ram/2016 Honda Pilot.2015 jeep grand Cherokee etc. Note: Doesn’t work with DRL Problem. Don’t use on HID light, This decoder only work on LED headlight, If you have any question about fitment and car model please contact us direct from Amazon message to double check
• 【Cannot Decode The Root Cause】 For some vehicles, the vehicle systems are sensitive to the aftermarket parts (the power of the LED headlight bulbs are lower than the halogen ones or the LED headlights interfere with the pulse signal of the car itself), so there may be not working properly, or blinking/flickering, or error/faulty/warning code issues after replacing the LED headlights.
• 【Special Reminder】Please make sure metal resistance not contact with plastic wire to prevent the plastic from melting; FIX LED Headlight Lamp Out Message:Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC;
• 【Kindly Note】For Do dge, To yota, Je ep, BM W mini, Le xus, Mer cedes ect.Due to the complexity of the car, universal decoders on the market may still fail to decode.Please click”Ask product question” beside your order.We will solve the problem for you.Cars are very complicated for the LED bulb upgrade,while we try to be as accurate as possbile with our listings,But still can not make 100% correct. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!

Features :

• Newest advanced H13 LED decoders, PLZ check the bulb size is H13 9008 before purchasing. Easy Installation: All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 15-20 minutes
• Fix: Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC
• Can solve flickering, error code, non-function etc. problems of most European vehicles
• Cross Reference Number: H13, 9008, H13LL, etc. Disclaimer: This decoder can be compatible for most vehicles, yet we can not guarantee it fixes all problems. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!
• We offer ONE year warranty and lifetime support

Features :

• 【Special Car Design】Tested known solvable models:2011/2012/2015 Jeep Wrangler/2006 Dodge RAM 2500/2016 Jeep Renegade/2007 Dodge Nitro.
• 【Cannot Decode The Root Cause】 For some vehicles, the vehicle systems are sensitive to the aftermarket parts (the power of the LED headlight bulbs are lower than the halogen ones or the LED headlights interfere with the pulse signal of the car itself), so there may be not working properly, or blinking/flickering, or error/faulty/warning code issues after replacing the LED headlights.
• 【Capacitor Decoders】KOOMTOOM led headlight bulb decoders are capacitor decoders which transmit by pulse signal, much better than resistance decoder, it is environmental and engery saving;All-in-One Design. Plug and Play Set up for LED Headlight Conversion Kits. Average Installation time: 10-15 minutes.
• 【Special Reminder】Please make sure metal resistance not contact with plastic wire to prevent the plastic from melting; FIX LED Headlight Lamp Out Message:Bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC;
• 【Kindly Note】For Dodge, Toyota, Jeep, BMW mini, Lexus, Mercedes ect.Due to the complexity of the car, universal decoders on the market may still fail to decode.Please click”Ask product question” beside your order.We will solve the problem for you.Cars are very complicated for the LED bulb upgrade,while we try to be as accurate as possbile with our listings,But still can not make 100% correct. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!

Features :

• Pack of 2 LED Headlight Decoder, Size H13 9008, Plug and play installation
• Fix: U.S. brand car’s Headlights that flicker-and-turn off while upgrade to LED, Cancels Radio Interference while upgrade to LED headlight
• Note: Don’t use on HID light, This decoder only work on LED headlight, If you have any question about fitment and car model please contact us direct from Amazon message to double check
• if your car facing led headlight on and off problem you might need LED decoder to resolve this problem
• 2 Year SiriusLED warranty from the date of purchase. warranty include replacement or exchange if confirmed manufacture defect or damaged while delivery

Features :

• [Feature]: LED Decoder is used to detect LED headlight failure/bulb rejection, excessive blinking, no blinking or bulb burnout indication, etc. Eliminate interference and eliminate problems such as error codes Ensure that metal resistors do not come in contact with plastic wires to prevent plastic melting.
• [Compatibility]: Voltage: DC 12V-14V, 4A MAX Current,This Canbus Decoder is suitable for 9004/HB1 LED bulbs and most vehicles. It can’t fit HID bulbs. Due to the special characteristics of different vehicles, we can’t guarantee 100% that we can solve the flickering problem.(Please make sure our Canbus socket type is suitable for your car before you buy)
• [Caution]: These resistors are suitable for lighter decoder problems that occur after installing LED lights, warning eliminator that solves the power problem of upgrading to LED headlight bulbs in most vehicles. If the light does not come on after installation, please rotate the plug because sometimes the polarity is reversed.
• [Plug and Play]: No modification, no wiring, plug and play setup for LED headlight conversion kit.
• [About Us]: We strive to constantly innovate to meet our customers’ needs, provide them with better products and create a perfect product experience. Our goal is to serve every detail and bring convenience to every home.

Features :

• This 9006/9005 LED resistors usually not solve Japanese vehicle’s DRL flickering. If you are looking LED DRL anti-flicker, please search Alla Lighting 9005 DRL anti-flickering harness. Set 2pcs 9005/ 9006 50W 6 Ohm LED Load Resistors for LED Error Fix or Anti-Flicker; Easy Installation: All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 15-20 minutes
• Aluminium Shell; Excellent heat dissipation. One LED resistor is required for each bulb
• Solves the problem of LED headlights bulbs flashing/flickering when installed. please make sure metal resistance not contact with plastic wire to prevent the plastic from melting.
• Clears OBC and CAN-BUS warning errors on the dashboard when LED bulbs are installed.
• Disclaimer: This decoder can be compatible for most vehicles, yet we can not guarantee it fixes all problems. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION! Cross reference number: 9005, 9006, HB3, HB4, 9005LL, 9006LL, 9005XL, 9005XS, 9006XS, 9005L+,etc,; Used for: halogen headlights, fog lamps,uprading led bulbs.

Features :

• 【Fitment List】: Compatible with H13 Plug for LED Headlight or Fog Light. NOT For Use With HID Lights. Wide Voltage DC 9V-16V, Wide service temperature range -40°C~+85°C, Power 5W/13.5V, Capactor 10000UF and 100% Waterproof design.
• 【Upgrade Design】: These H13 LED Digital Smart Intelligent Decoder made of aluminum box for safety protect and heat sinking, digital circuit board with resistor, capacitor, smart IC and other components. Metal braided Cable helps avoiding from being current interferenced. Nicely design and precise craft, durable and long lifetime.
• 【High Quality Performance】: Design to eliminate error message on dashboard. Fix aftermarket LED flickering problem ＆ Cancel radio interference. More efficiently to fix LED Headlight Failure, Bulb Rejection, Hyper Flashing, Eliminate Error Codes and other more problem. Nice warning canceller to solve most vehicles power issue from upgrading to LED headlight bulbs.
• 【Easy Installation】: All In One Design. Plug and Play simply installation for LED Headlight Conversion Kits, Perfect fit and direct replacement, no modification or trimming require.
• 【Package Including】: 1x pair of H13 LED Headlight Canbus Decoders. This Decoder can be Compatible for Most Vehicles, but sorry that we can’t guarantee it fixes all Problems. Product Come with 1 year warranty and lifetime support to Ensure 100% Satisfaction.