Top 10 Best Layer Height For Ender 3 – Recommended By Editor

Features :

• Ender 3 Z-Axis Upgrade 2040 Profiles Kit: This is a great addition to your Ender 3, Ender 3 Pro, not fit for CR10 series. It gives you extra height when you need it : Enlarge 5.9 inches printing space to z height of your Ender 3 Printer. Before you choose firmware, you need to confirm which MCU your Ender-3 board is, there are 2 kinds of MCU: atmega1284p, stm32f103ret6(v4.2.2). About more detail firmware settings, please refer to our ” FYSETC/FYSETC-ENDER3-Size-Extension” on github.
• Package includes: 2Pcs 550mm/ 21.6 inch 2040 Aluminum Extrusions+1Pcs 515mm T8 Lead Screw(pitch 2mm Lead 8mm) + 3Pcs Longer Motor/ Limit Switch Connect Cables+Marlin firmware Setting tools
• Easy to install: comes with everything you need in the box. Install instruction please reference the video at the left pictures. You need to use a customer marlin firmware to play the full potential of this product. The kit comes with the marlin update tools.
• After installing, extended height from stock 220mm/ 8.7inch up to 400mm/ 15.7inch, printing area up to:235*235*400mm/9.2*9.2*15.7 inch,
• Kindly Tips: Make sure to make a drawing or take a picture of the original setup before you disassemble in case you need to refer back to it. Just take off the power supply, the top rail, the Z stepper motor, if you still use it, the Z End Stop bracket and the rail holding the hotend and extruder. Change the setting in your firmware from 250 to 400.

Features :

• Perfect upgrades for your CREALITY Ender 3, Ender 3 Pro, Ender 3 V2 3D Printers. Absolutely Essential E3P mod: Your 3D printer accuracy can’t be beat by anything else you’ve made before this.
• High quality materials and meticulous workmanship enable this upgrade kit’s long service life. Perfect simple upgrade. Easy to install just switch the middle pins on the stepper motor harness that this kit come with.
• Made of high quality aluminium alloy, the timing belt tensioner can easily adjust the tension of belt.
• Double Z structure runs smoothly. Using the original T8 leads to 2MM screw. Use all-aluminum coupling and original 42 stepper motor, stable operation.
• Minimal cost upgrade and maximum optimization. Low upgrade cost, Cost-effective(high cost performance), technical guidance, mature solution.

Features :

• 【Increased Accuracy】Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
• 【Stable Performance】 Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
• 【Smooth Running】 Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
• 【High Comparable】The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
• 【After Sales Service】Creality 3D pay great attention to the buyer’s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Features :

• What You Get: A toddler set of Terramar Sports 2.0 Free Rider thermals. They come in multiple color options and perfect to keep your kids warm while it’s cold out! These thermals are rated a 2.0 on the warmth level.
• Not only are these thermals moisture wicking, they have been treated to respond to your body’s changing conditions to keep you comfortable no matter what your kids activity level is.
• Features: Ec2 Quick-Dri Thermoregulation Comfort Technology which allows the fabric to dry at a quick speed while regulating your body’s natural temperature and keeping your body warm. It is built to stretch so there is no irritation or bunching.
• Terramar Sports is a United States based company making base layer gear for the most extreme outdoors person. Our products are created for every day adventures to difficult snowshoeing and mountain climbing. Keeping you warm is our job!
• How to Wash: Washer and dryer safe! Machine wash cold with like colors. Only non-chlorine bleach when needed. Tumble dry low. Do not iron.

Features :

• They are supportive, yet flexible enough to fit most closed shoe styles.
• Invisible insoles, increase your height and make you more confident.
• Silicone heighten shoe pads cover design, convenient and practical.
• Fit most style of shoes, sneaker, boot, etc. Wonderful gift for your friends and families.
• Made with lightweight and medical grade silicone, durable to wear.

Features :

• Unwind and relax with the rich, calming, comforting cozy cocoa bed time shake.
• Made with a nighttime protein blend that includes a milk peptide with relaxing properties to supports a healthy sleep routine.
• 10g of protein to help your body, build, repair & maintain muscle while you sleep
• Contains 12 vitamins and minerals including magnesium & zinc for a calming effect on your body
• 2g of sugar, 90 calories, gluten free, low fat, Kosher

Features :

• BIGTREETECH CB1 Heatsink
• Specially designed for CB1, ensure good heat dissipation
• Durable material, simple and beautiful appearance

Features :

• ATTENTION BEFORE USE：Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
• ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
• EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
• CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
• SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.

Features :

• This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer and Insanity Automation. The ONLY open source AND Plug-And-Play Ender touch screen on Amazon, flashed at the Creality factory with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!
• A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 (Ender 5 must update board firmware). Along with more added features than any other touch screen available, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen.
• This is the newest version of Creality’s 4.2.7 32 Bit silent control board with authentic TMC2225 Trinamic stepper drivers which greatly reduces the sound of the stepper motors during use. The 4.2.7 board comes flashed with our custom Marlin firmware that works with all Ender 3 series printers. This entire hardware swap will take less than 1 hour and quickly turns your stock Ender into a touch operated printer in just one upgrade as well as adding dozens of features over stock Creality firmware!
• The BL Touch is an incredibly accurate and reliable auto-mesh bed leveling sensor that probes individual spots for differences in Z height on any print surface such as glass, aluminum, PEI, BuildTak with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Custom firmware even speeds up this process to further save time while still maintaining accuracy
• First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open-source potential! Enhance your Ender 3 / Pro/ V2/ Max/ 5 with previously unavailable features. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Please contact F1rst Layer directly for any questions or technical support. A filament runout sensor, 24V silent fan and metal carrying handle are also included in this kit.

Features :

• ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.
• ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
• ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!
• ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
• ✔️【Wide Application】✔️ The size of ender 3 PEI is 235*235mm（9.25*9.25inch). Please confirm the size of your 3d printer. After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.